5302D-05A/012AC080AT非原厂品赔百
5302D-05A/012AC080AT安装便捷、5302D-05A/012AC080AT美国PCB实惠
TORKDISC®, ROTARY TORQUE SENSOR,16-BIT
Measurement Range: 2000 in-lb (226 Nm)
Temperature Range: +32 to +185 °F (0 to +85 °C)
Torsional Stiffness: 5800000 in-lb/radian (655312N-m/radian)
Overload Limit: 3300 in-lb (373 Nm)
Housing Material: Anodized Aluminum
Weight: 3.5 lb (1.6 kg)
PERFORMANCEMeasurement Range (Full Scale Capacity)2000 in-lb226NmAccuracy±0.10 % FS±0.10 % FS[4] Frequency Range (-3 dB)0 to8500 Hz0 to 8500 Hz
Filter Type (High Pass)2-pole Butterworth2-poleButterworth[5][6] Filter Type (Low Pass - Anti Alias)8-poleElliptical8-pole Elliptical
Voltage Output (channel A - AC coupled)±10 V±10 V
Voltage Output (channel B - DC coupled)±10 V±10 V
Gain (Channel A)1-16 dB1-16 dB
Gain (Channel B)0.3-1.3 dB0.3-1.3 dB
Digital OutputQSPIQSPI[1] Maximum Load (Axial)500 lb2.2kN[2][3] Maximum Load (Lateral)500 lb2.2 kN[2][3] MaximumMoment1500 in-lb169 Nm[2][3] ENVIRONMENTALOverload Limit (BoltJoint Slip)3300 in-lb373 Nm[7] Overload Limit (Failure)8000in-lb904 Nm
Overload Limit (Safe)6000 in-lb678 Nm
Temperature Range (Rotor/Stator - Operating)+32 to +185 °F0 to +85°C
Temperature Range (Rotor - Compensated)+70 to +170 °F+21 to +77°C
Temperature Range (Receiver - Operating)0 to +122 °F-17.7 to 50°C
Temperature Effect on Output (System - within compensatedrange)0.002 %FS/°F0.0036 %FS/°C
Temperature Effect on Zero Balance (System - within compensatedrange)0.002 %FS/°F0.0036 %FS/°C
Position Sensitivity (180° rotation of sensor)≤0.1 % FS≤0.1 %FS
ELECTRICALPower Required9 to 18 VDC9 to 18 VDC[8] DigitalResolution16 Bit16 Bit
Digital Sample Rate26484 samples/sec26484 samples/sec
Analog Resolution (based on ±10 V FSO and 16-bit resolution)0.31mV0.31 mV
PHYSICALMaximum Speed15000 RPM15000 RPM
Permissible Axial Float (rotor to stator)0.25 in6.4 mm
Permissible Radial Float (rotor to stator)0.25 in6.4 mm
Rotating Inertia (without adaptors)0.056 in-lb/sec20.006N-m/sec2
Dynamic Balanceper ISO G 2.5per ISO G 2.5
Torsional Stiffness5800000 in-lb/radian655312 N-m/radian
Torsional Angle (at Full Scale Capacity)0.020 °0.020 °
Housing Material (Sensor)Anodized AluminumAnodized Aluminum
Weight (rotor/sensor)3.5 lb1.6 kg
All specifications are at room temperature unless otherwisespecified.
Product Notes
[1] Request Technical Note FTQ-STN5 regarding digital outputsignal.
[2] Extraneous load limits reflect the maximum axial load, lateralload, and bending moment that may be applied singularly withoutelectrical or mechanical damage to the sensor.
[3] Where combined extraneous loads are applied, decrease loadsproportionally.
[4] Root sum square of non-linearity, hysteresis, and nonrepeatability.
[5] Selectable High Pass cutoff frequencies of 5, 10, 20, 200 and500 Hz.
[6] Selectable Low Pass cutoff frequencies of 10,000, 5000, 2500,1200, 625 and 313 Hz.
[7] Bolt joint slip torque is calculated assuming a coefficient offriction (µ) of 0.1 and that grade 8 socket head cap screws areused and tightened to 30% of yield.
[8] Supplied with universal AC power adaptor.
[9] See PCB Declaration of Conformance PS069 for details.
Accessories:
Supplied012AC024ATCable(1)182-028AConnector(1)
M0003978Power supply(1)
