1631-03C（1630-03C）1631-01C

1631-03C（1630-03C）1630-04C/1631-01C

1631-03C（1630-03C）1630-04C/1631-01C国外原装

PCB L&T S-Type Load Cell,100 lbf rated capacity, 150% of RO static overload protection,2mV/V output, 1/4-28 UNF threads, integral 10 ft cable w/ open end,aluminum construction

Measurement Range: 100 lb (445 N)

Size - Height: 2.50 in (64 mm)

Electrical Connector: 10 ft - Integrated Cable

PERFORMANCEMeasurement Range100 lb445 N[1] Sensitivity (±10%)2 mV/V2 mV/V[2] Non-Linearity≤0.05 % FS≤0.05 % FS
Hysteresis≤0.03 % FS≤0.03 % FS
Non-Repeatability≤0.02 %RO≤0.02 %RO
Creep (in 20 minutes)≤0.08 %≤0.08 %
Resonant Frequency1.8 kHz1.8 kHz
ENVIRONMENTALOverload Limit150 lb667 N
Load Limit (Side Force, FX or FY)10lb44.5 N[3] Load Limit (Bending Moment,MX or MY)20 in-lb2.26Nm[3] Load Limit (Axial Torque, MZ)20 in-lb2.26Nm[3] Temperature Range (Operating)0 to +200 °F-18 to +93°C
Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C
Temperature Effect on Output (Maximum)±0.0008 %Reading/°F±0.0015%Reading/°C[4] Temperature Effect on Zero Balance(Maximum)±0.0015 %FS/°F±0.027 %FS/°C[4] ELECTRICALBridgeResistance350 Ohm350 Ohm[5] Excitation Voltage (Recommended)10VDC10 VDC[6] Insulation Resistance>5000000000Ohm>5000000000 Ohm
Zero Balance±1 % FS±1 % FS
PHYSICALSize - Height2.50 in64 mm[7] Size - Width0.625 in16mm[7] Size - Length2.00 in51 mm[7] Weight0.23 lb104 g
Mounting Thread1/4-28 threadNo Metric Equivalent
Housing MaterialAluminumAluminum
Sensing ElementStrain GageStrain Gage
Deflection at Full Scale Capacity0.002 in0.05 mm
Electrical Connector10 ft - Integrated Cable10 ft - IntegratedCable
Electrical Connection PositionSideSide

All specifications are at room temperature unless otherwisespecified.

Product Notes

[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 46137 for Complete Dimensions

PCB L&T S-Type Load Cell, 1klbf rated capacity, 150% of RO static overload protection, 2mV/Voutput, 1/2-20 UNF threads, integral 10 ft cable w/ open end,aluminum construction

Measurement Range: 1000 lb (4448 N)

Size - Height: 3.0 in (76.2 mm)

PERFORMANCEMeasurement Range1000 lb4448 N[1] Sensitivity (±10%)2 mV/V2 mV/V[2] Non-Linearity≤0.05 % FS≤0.05 % FS
Hysteresis≤0.03 % FS≤0.03 % FS
Non-Repeatability≤0.02 %RO≤0.02 %RO
Creep (in 20 minutes)≤0.08 %≤0.08 %
Resonant Frequency3.2 kHz3.2 kHz
ENVIRONMENTALOverload Limit1500 lb6672 N
Load Limit (Side Force, FX or FY)100lb445 N[3] Load Limit (Bending Moment, MX orMY)200 in-lb22.6 Nm[3] Load Limit (Axial Torque,MZ)200 in-lb22.6 Nm[3] Temperature Range(Operating)0 to +200 °F-18 to +93 °C
Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C
Temperature Effect on Output (Maximum)±0.0005 %Reading/°F±0.0015%Reading/°C[4] Temperature Effect on Zero Balance(Maximum)±0.0015 %FS/°F±0.027 %FS/°C[4] ELECTRICALBridgeResistance350 Ohm350 Ohm[5] Excitation Voltage (Recommended)10VDC10 VDC[6] Insulation Resistance>5000000000Ohm>5000000000 Ohm
Zero Balance±1 % FS±1 % FS
Output Polarity+Tension+Tension
PHYSICALSize - Height3.0 in76.2 mm
Size - Width1.0 in25.4 mm
Size - Length2.0 in51.0 mm[7] Weight0.43 lb195 g
Mounting Thread1/2-20 ThreadNo Metric Equivalent
Housing MaterialAluminumAluminum
Sensing ElementStrain GageStrain Gage
Deflection at Full Scale Capacity0.0025 in0.05 mm
Electrical Connector10 ft - Integrated Cable10 ft - IntegratedCable
Electrical Connection PositionSideSide

All specifications are at room temperature unless otherwisespecified.

[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 46138 for Complete Dimensions