1411-02ADB稳定选择
1411-02ADB顺手运用、1411-02ADB只做原装、1411-02ADB样品推送
Dual bridge load cell, fatiguerated low profile, 100k lb FS, 2 3/4-8 (F) thd, PT conn.
Specifically designed forairframe structural, lifetime and fatigue testing applications onwings, fuselage, landing gear, iron bird and other airframecomponents. •Series 1400 includes a dual output feature that offerssensor redundancy and the ability to provide control feedback fromone output while the other is used for data ac •A2LAaccredited calibration to ISO 17025 in both tension and compressiondirections •Fatigue rated load cells are guaranteed for 100 millionfully-reversed cycles •Thermally compensated •Moment compensated •Asingle shunt calibration resistor is provided with each load cellfor ease of calibration at the test site
Measurement Range: 100 klb (445 kN)
Size - Diameter: 11.00 in (279.40 mm)
Size - Height: 7.00 in (177.80 mm)
Electrical Connector: PT02E-10-6P (2)
English:SI:PERFORMANCEMeasurement Range (100 x 10^6 cycles)100 klb445kN[2][4] Sensitivity (±10 %) (Rated Output)2.0 mV/V2.0mV/V[1][3] Non-Linearity≤0.06 % FS≤0.06 % FS
Hysteresis≤0.06 % FS≤0.06 % FS
Non-Repeatability≤0.02 % FS≤0.02 % FS
Creep (in 20 minutes)0.025 %0.025 %
Static Error Band≤0.06 % FS≤0.06 % FS[2] Eccentric LoadSensitivity≤0.1 %/in≤0.1 %/25.4mm
Resonant Fre kHz18 kHz
Side Load Sensitivity≤0.1 %/in≤0.1 %/25.4mm
ENVIRONMENTALOverload Limit300 klb1335 kN
Load Limit (Side Force, FX or FY)100klb445 kN[5] Load Limit (Bending Moment,MX or MY)100k lbf-in11.3kNm[5] Load Limit (Axial Torque, MZ)100klbf-in11.3k Nm[5] Temperature Range (Operating)-65 to +200°F-54 to +93 °C
Temperature Range (Compensated)+15 to +115 °F-9 to +46 °C
Temperature Effect on Output (Maximum)±0.0008 %Reading/°F±0.0018%Reading/°C[6] Temperature Effect on Zero Balance(Maximum)±0.0008 %FS/°F±0.0018 %FS/°C[6] ELECTRICALBridgeResistance350 Ohm350 Ohm[1] Excitation Voltage (Recommended)10VDC10 VDC[7] Insulation Resistance≥5k GOhm≥5k GOhm
Zero Balance≤1 % FS≤1 % FS
Output Polarity+Tension+Tension
PHYSICALSize - Height7.00 in177.80 mm[8] Size - Diameter11.00in279.40 mm[8] Weight135 lb61.3 kg
Mounting Thread2 3/4 - 8 UN-3BNo Metric Equivalent
Sensing ElementStrain GageStrain Gage
Mounting Tor lbf-in678 Nm
Deflection at Full Scale Capacity0.001 in0.03 mm
Electrical ConnectorPT02E-10-6P (2)PT02E-10-6P (2)
All specifications are at room temperature unless otherwisespecified.
Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] RO - Rated Output.
[4] Calibrated in tension and compression.
[5] Singularly applied, i.e. no other extraneous loads.
[6] Over compensated operating temperature range.
[7] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[8] See Outline Drawing 51434 for Complete Dimensions
Accessories:
Optional084A40Lifting Plug(1)084A41Lifting Plug(1)
084A58Pre-Tension Stud(1)
084A59Pre-Tension Stud(1)
181-012APT06A-10-6S(SR)(1)
8311-01-10ACABLE(1)
Optional Versions:
No optional versions
